While self-installing laminate flooring is relatively simple, navigating areas such as staircases can be tricky. Thankfully, when it comes to how to lay laminate flooring on stairs, there are a few tips and tricks that make the job easier. Here at Discount Flooring Depot, we’ve created a handy step-by-step guide for you to follow and ensure you’re left with a great end result. 

The Steps to Install Laminate on Stairs

Step 1: Remove Existing Flooring and Underlay

Before you start laying your laminate flooring, the first step is to ensure your staircase is prepped and ready. If you haven’t already, start by removing any existing flooring from your stairs, along with the existing underlay. Once you have a bare staircase, ensure you remove any paint and adhesive and hammer down any protruding nails. Next, give your stairs a thorough brush down to create a clean and even surface to start from.

Step 2: Remove any Overhang

You may find your stairs have an overhang from existing nosing (the protruding edge of the stair). You’ll need to remove this before you can install your laminate and your own nosing (we’ll get to that bit later). To remove the overhang, you can cut it away using a jigsaw, or nail a piece of plywood to the riser to fill in the space underneath.

Step 3: Lay Your Underlay

Underlay shouldn’t be considered an optional extra; as it can help muffle sound, improve acoustics and create a more comfortable feel underfoot, it’s particularly important for areas of high traffic such as stairs. Ensure you choose the right underlay for your laminate, before securing it to your stairway, ready to install your flooring.

Step 4: Cut Your Laminate to Size

For each step, you’ll need three pieces of  laminate: 

• The tread piece, which sits on top of the step
• The riser piece, which sits vertically on the front of the step
• And the stair nosing (or trim), which hangs over the front of the step.

To measure the length you’ll need for your tread pieces, lay your laminate plank across the top of the step, ensuring it fits as snuggly as possible on either side. You may need to trim your board down to size to do this. If a single laminate plank is not thick enough to cover the entirety of your step, cut a second plank to size and glue this tongue-to-groove next to your first plank, leaving some room to accommodate the nosing.

Similarly, when it comes to the riser pieces, ensure these are level with the riser on your stairs and that they sit snugly on top of the tread piece. You may also need to cut these down to size to fit your stair length.

When it comes to your nosing, this simply needs to be the same length as your tread and riser. 

Step 5: Lay the Tread

As laminate needs time to dry before you can walk on it, start your installation at the top of the stairs and work downwards to avoid getting stuck upstairs! Using wood adhesive, glue your tread to your first step, ensuring it lies tightly against the back of the step with the tongue facing outwards.

Step 6: Fit the Riser

Next, glue your riser piece of laminate to the vertical front of the step and hold this in place while it sets. If necessary, you can also nail the very top of the riser in place, as this will be covered by your nosing. 

Step 7: Add the Nosing

Once you’ve secured your riser and tread, the next step is to add your nosing, which acts as an edge trim on each step. Unless you’re using a self-adhesive nosing edge, glue it in place with the tapered end over the thread. 

Step 8: Leave for 12 Hours 

Finally, once you’ve completed your entire staircase, leave your laminate to set overnight and avoid walking on it for around 12 hours.

Now you know how to lay laminate flooring on stairs like a pro, you can ensure yours is fitted to perfection and enjoy the complete transformation of your new staircase. 

Remember, if you’re not confident in your ability to self-install, it’s always recommended to seek the help of a professional.

This post appeared first on https://www.discountflooringdepot.co.uk

There are so many options to choose from when it comes to finishes on wooden flooring: brushed, oiled, unfinished, lacquered… but what exactly are the differences between them and how do you decide which is best for you? We’ve whittled them together, so you’ve got all the information in front of you…

Brushed

This effect is created by wire being used to pull out the softer spring wood exposing the harder wood. This in turn creates a beautiful, textured surface, which is advantageous as it can disguise scratches. It also adds to the authentic appeal of the floor, great if you’re looking for that rustic look, something growing ever more popular. It is also strategic if you want a more naturalistic authentic surface, as opposed to something too glossy. It can be applied to lacquered and an oiled finish, and is an option on both solid and engineered wood products.

Oiled

An oiled finish provides your wooden floor with surface protection as well as a defence against anything that might penetrate it beyond the surface. It keeps the wood’s glorious natural premise without it being completely exposed. Generally speaking, it’ll give you a smooth matt finish.

Although it requires a little more cleaning and upkeep than other choices of finishes; because of the penetrating protection, it’ll provide you with a longer lasting flooring with more resistance to stains and scratches.

Lacquered/ High Gloss and Chalk

This is similar to a modern varnish, which sits on top of the wood as opposed to oil which seeps past the surface. This finish is perfect if you’re wanting a clean cut, smooth aspect to your flooring. For this reason, it’s ideal in heavy footfall rooms where you’re desiring that grand, glossy look.

The varnish makes lacquered somewhat water resistant, however we wouldn’t recommend allowing large abundances of water coming into contact with it.

If you are wanting to go one step further and dazzle your guests with a floor which gleams in the light, then you may also want to consider a High Gloss finish.  Not only does it provide a stunning polished look, but also has an added layer of protection as a result.

The disadvantage of lacquered flooring is that it is more likely to show scratches than its competition. Because of this, it may need sanding down and refinishing more often than other finishes.

It is also possible to get matt lacquered finish, however it is worth being aware that there will still be a slight shine, so if you’re wanting something with no gloss, then look at products with an oiled finish instead.

Hand Scraped

If you’re after a flooring with an added bit of character and rustic appeal, then hand scraped is perfect. The planks are made no differently, however the surface has been scraped by hand before a lacquered or oil finish is applied. This means that no two planks are the same, creating an interesting variation of pattern as well as giving it a rustic charm. It comes in difference widths, lengths, thicknesses, type of wood and colour, meaning you can select what exactly it is you’re after.

Unfinished

This one speaks for itself, it is simply the raw exposed wood. This is not something that you’d lay down as it is, as raw wood will stain and wear away a lot quicker than one with a finished applied. People often opt for this flooring if they are wanting to apply the finish themselves.

Invisible Oiled

A relatively new concept in the flooring world, this is ideal if you’re wanting all the protection of an oiled finish but without compromising that authentic rustic look. Behind the scenes the oil is working its magic, penetrating the wood and protecting your flooring from the wear and tear of everyday life.

It’s always a good feeling when you have your heart set on a particular finish, however understanding the story behind it will help protect your flooring so you can enjoy it for years to come, worry free.

Distressed

This is where the wood has been purposely aged in order to achieve a worn appearance. An interesting process, imperfections are added to the surface to increase charisma and character. This look is very popular in rustic homes, as its honest, realistic appeal charms any rustic interior perfectly.

Whitewashed

If you’re looking for a fresh, clean airy look to your wooden flooring then this finish is ideal. Adding a whitewashed coat, consisting of a mix of white paint and water will create a shabby chic interior. Or even if you’re ready for a change in colour scheme or want to mix things up a bit.

Smoked

This is where oak flooring has been treated to alter its colour, usually making it darker. However, the top layer can become slightly pale or faded as a result of this process, increasing the rustic appeal. It involves putting the oak in an environment which ammonia is introduced into the atmosphere, this in turn changes the colour.

This is great if you’re looking for more traditional décor or even striving for that industrial appearance, something very on trend this year!

 

The post Solid and engineered wood flooring- finishes explained appeared first on Blog & Advice Centre – Luxury Flooring & Furnishings.

This post appeared first on https://www.luxuryflooringandfurnishings.co.uk

There are so many options to choose from when it comes to finishes on wooden flooring: brushed, oiled, unfinished, lacquered… but what exactly are the differences between them and how do you decide which is best for you? We’ve whittled them together, so you’ve got all the information in front of you…

Brushed

This effect is created by wire being used to pull out the softer spring wood exposing the harder wood. This in turn creates a beautiful, textured surface, which is advantageous as it can disguise scratches. It also adds to the authentic appeal of the floor, great if you’re looking for that rustic look, something growing ever more popular. It is also strategic if you want a more naturalistic authentic surface, as opposed to something too glossy. It can be applied to lacquered and an oiled finish, and is an option on both solid and engineered wood products.

Oiled

An oiled finish provides your wooden floor with surface protection as well as a defence against anything that might penetrate it beyond the surface. It keeps the wood’s glorious natural premise without it being completely exposed. Generally speaking, it’ll give you a smooth matt finish.

Although it requires a little more cleaning and upkeep than other choices of finishes; because of the penetrating protection, it’ll provide you with a longer lasting flooring with more resistance to stains and scratches.

Lacquered/ High Gloss and Chalk

This is similar to a modern varnish, which sits on top of the wood as opposed to oil which seeps past the surface. This finish is perfect if you’re wanting a clean cut, smooth aspect to your flooring. For this reason, it’s ideal in heavy footfall rooms where you’re desiring that grand, glossy look.

The varnish makes lacquered somewhat water resistant, however we wouldn’t recommend allowing large abundances of water coming into contact with it.

If you are wanting to go one step further and dazzle your guests with a floor which gleams in the light, then you may also want to consider a High Gloss finish.  Not only does it provide a stunning polished look, but also has an added layer of protection as a result.

The disadvantage of lacquered flooring is that it is more likely to show scratches than its competition. Because of this, it may need sanding down and refinishing more often than other finishes.

It is also possible to get matt lacquered finish, however it is worth being aware that there will still be a slight shine, so if you’re wanting something with no gloss, then look at products with an oiled finish instead.

Hand Scraped

If you’re after a flooring with an added bit of character and rustic appeal, then hand scraped is perfect. The planks are made no differently, however the surface has been scraped by hand before a lacquered or oil finish is applied. This means that no two planks are the same, creating an interesting variation of pattern as well as giving it a rustic charm. It comes in difference widths, lengths, thicknesses, type of wood and colour, meaning you can select what exactly it is you’re after.

Unfinished

This one speaks for itself, it is simply the raw exposed wood. This is not something that you’d lay down as it is, as raw wood will stain and wear away a lot quicker than one with a finished applied. People often opt for this flooring if they are wanting to apply the finish themselves.

Invisible Oiled

A relatively new concept in the flooring world, this is ideal if you’re wanting all the protection of an oiled finish but without compromising that authentic rustic look. Behind the scenes the oil is working its magic, penetrating the wood and protecting your flooring from the wear and tear of everyday life.

It’s always a good feeling when you have your heart set on a particular finish, however understanding the story behind it will help protect your flooring so you can enjoy it for years to come, worry free.

Distressed

This is where the wood has been purposely aged in order to achieve a worn appearance. An interesting process, imperfections are added to the surface to increase charisma and character. This look is very popular in rustic homes, as its honest, realistic appeal charms any rustic interior perfectly.

Whitewashed

If you’re looking for a fresh, clean airy look to your wooden flooring then this finish is ideal. Adding a whitewashed coat, consisting of a mix of white paint and water will create a shabby chic interior. Or even if you’re ready for a change in colour scheme or want to mix things up a bit.

Smoked

This is where oak flooring has been treated to alter its colour, usually making it darker. However, the top layer can become slightly pale or faded as a result of this process, increasing the rustic appeal. It involves putting the oak in an environment which ammonia is introduced into the atmosphere, this in turn changes the colour.

This is great if you’re looking for more traditional décor or even striving for that industrial appearance, something very on trend this year!

This post appeared first on https://www.luxuryflooringandfurnishings.co.uk

Homeowners love to get imaginative about living rooms, bedrooms and kitchens, fantasising what flooring will go best with their furniture and which will aesthetically enhance their home the most; but everyone forgets about the stairs.

When in fact, the stairs are among the heaviest foot traffic areas in the house. With people using them nearly every day (if not every day), then you do need to consider which flooring it most suitable.

You may or may not have noticed, but often homes have snazzy new flooring in the main rooms, but the stairs haven’t been blessed with such a privilege, frequently sporting a rather out of date and weary looking carpet. This is for the simple reason people forget to update them, they are there for practicality rather than to impress. Nevertheless, you’d be surprised by how much livelier your home can look if you were to invest in fresh new floors for your stairs, here are some of the best options we’d recommend…

Carpet

 The clear choice for stairs. It’s comforting underfoot and homely. Often stairs are leading up to the bedroom, which usually has carpet in it too, therefore it fits with the theme nicely. Falling down the stairs is certainly something you do not want to do, and carpet largely stops any slipping due to its grip, even if something is spilt. If you’ve got children running up and down the stairs, carpets would significantly reduce the risk of accidents. Again, children often play on them, sliding down and all sorts; a softer landing therefore being a safer option.

Nevertheless, like any flooring it comes with its negatives. Stairs lose their colour over time especially when they come into contact with sunlight, therefore if a window faces your stairs it is something to consider when buying new flooring. As mentioned previously, stairs experience a high amount of foot traffic. Over time, a carpet becomes worn and sometimes flat, taking away from its original visual appeal.

Another factor worth contemplating when choosing your flooring for stairs is maintenance and cleaning. As I am sure you already know, carpets need hoovering and more often if the floor is heavily used, consequently more upkeep required. Hoovering stairs is significantly more effort than hoovering a room, due to carrying the hoover up and down the steps. Someone who is elderly or disabled may find this a more difficult task, so if you fall into either of these categories it may be worth considering when picking.

Real wooden flooring

There’s no doubt that your stairs would look glam, as nothing compares to the classy fine-looking look of real wooden flooring. Plus, it is a popular choice for hallways, which most of the time matches the stairs. Real wooden flooring is also exceedingly durable, ideal for high traffic areas, as well as adding value to your home when you come to sell.

Buyers usually want rooms such as hallways to have neutral flooring and walls, which is why real wooden flooring would be unbeatable. It never goes out of fashion, so you can rest assured you won’t feel like you’ll need to update in a few years due to a change in trends.

No doubt your real wooden staircase will impress anyone visiting your home, however they can be slippery, especially if liquid is spilt on them. Falling down the stairs can cause considerably more damage than slipping on a flat surface, so it is indeed something to bear in mind.

If you have pets which have paws that can scratch, real wooden flooring may not be the best option, especially if they are scrambling and playing up and down the stairs. Here at Luxury Flooring we offer real wooden flooring that have ridges to help disguise any scratches. So, if you’re prepared to accept the odd scratch here and there then there is no objection for it as an option. Of course, keeping your pet’s paws trimmed can help reduce the amount of damage your stairs takes.

So what is the answer? If you place a runner on your stairs you can still enjoy the crisp look of real wooden flooring without the slipping hazard and fear of scratches. Here at Luxury Flooring we would always say that wooden flooring is the best for most rooms and stairs, due to their beautiful appearance and practicality.

The post Which flooring is best for stairs? appeared first on Blog & Advice Centre – Luxury Flooring & Furnishings.

This post appeared first on https://www.luxuryflooringandfurnishings.co.uk

Homeowners love to get imaginative about living rooms, bedrooms and kitchens, fantasising what flooring will go best with their furniture and which will aesthetically enhance their home the most; but everyone forgets about the stairs.

When in fact, the stairs are among the heaviest foot traffic areas in the house. With people using them nearly every day (if not every day), then you do need to consider which flooring it most suitable.

You may or may not have noticed, but often homes have snazzy new flooring in the main rooms, but the stairs haven’t been blessed with such a privilege, frequently sporting a rather out of date and weary looking carpet. This is for the simple reason people forget to update them, they are there for practicality rather than to impress. Nevertheless, you’d be surprised by how much livelier your home can look if you were to invest in fresh new floors for your stairs, here are some of the best options we’d recommend…

Carpet

 The clear choice for stairs. It’s comforting underfoot and homely. Often stairs are leading up to the bedroom, which usually has carpet in it too, therefore it fits with the theme nicely. Falling down the stairs is certainly something you do not want to do, and carpet largely stops any slipping due to its grip, even if something is spilt. If you’ve got children running up and down the stairs, carpets would significantly reduce the risk of accidents. Again, children often play on them, sliding down and all sorts; a softer landing therefore being a safer option.

Nevertheless, like any flooring it comes with its negatives. Stairs lose their colour over time especially when they come into contact with sunlight, therefore if a window faces your stairs it is something to consider when buying new flooring. As mentioned previously, stairs experience a high amount of foot traffic. Over time, a carpet becomes worn and sometimes flat, taking away from its original visual appeal.

Another factor worth contemplating when choosing your flooring for stairs is maintenance and cleaning. As I am sure you already know, carpets need hoovering and more often if the floor is heavily used, consequently more upkeep required. Hoovering stairs is significantly more effort than hoovering a room, due to carrying the hoover up and down the steps. Someone who is elderly or disabled may find this a more difficult task, so if you fall into either of these categories it may be worth considering when picking.

Real wooden flooring

There’s no doubt that your stairs would look glam, as nothing compares to the classy fine-looking look of real wooden flooring. Plus, it is a popular choice for hallways, which most of the time matches the stairs. Real wooden flooring is also exceedingly durable, ideal for high traffic areas, as well as adding value to your home when you come to sell.

Buyers usually want rooms such as hallways to have neutral flooring and walls, which is why real wooden flooring would be unbeatable. It never goes out of fashion, so you can rest assured you won’t feel like you’ll need to update in a few years due to a change in trends.

No doubt your real wooden staircase will impress anyone visiting your home, however they can be slippery, especially if liquid is spilt on them. Falling down the stairs can cause considerably more damage than slipping on a flat surface, so it is indeed something to bear in mind.

If you have pets which have paws that can scratch, real wooden flooring may not be the best option, especially if they are scrambling and playing up and down the stairs. Here at Luxury Flooring we offer real wooden flooring that have ridges to help disguise any scratches. So, if you’re prepared to accept the odd scratch here and there then there is no objection for it as an option. Of course, keeping your pet’s paws trimmed can help reduce the amount of damage your stairs takes.

So what is the answer? If you place a runner on your stairs you can still enjoy the crisp look of real wooden flooring without the slipping hazard and fear of scratches. Here at Luxury Flooring we would always say that wooden flooring is the best for most rooms and stairs, due to their beautiful appearance and practicality.

This post appeared first on https://www.luxuryflooringandfurnishings.co.uk

If you’ve ever had hardwood floors or wooden furniture, you know about the dangers of staining. And there is nothing more dreadful to the material than water! Some of them are clear, some of them are dark, and most of them can be permanent. 

Unlike what some may believe, however, it is possible to remove them, even the older ones. Here are some of the best ways to get rid of these stains:

ATTENTION: Before starting, always make sure to clean the floors and wipe away the dust. This will help avoid any scratches or additional wear. 

Dark Stains

If water gets through the finish of the hardwood floors, it will then darken the actual wood. This means you’ll need to get through the finish layer. 

Steel wool. This is only recommended for people that have a good eye and can use their hands well. Slightly rub the stained area in order to remove the stain. Do it very lightly. Also apply pressure to unstained areas close to the stain, blending it in so there’s not a major bump.

Sandpaper. While the steel wool might not work for some, it’s unlikely that filing with sandpaper won’t help. Do it the same way as suggested for steel wool, filing through the stain and blending slightly to the unstained areas.

Vinegar. An ingredient common to every household, vinegar can help remove the layers of the stain. Just soak a damp rag and put it on the stained area, leaving it there for 5-10 minutes. You might need to apply it more than once to remove it completely, or for bigger stains.

Chlorine bleach. A more chemical and effective option would be using chlorine bleach. Since it might be a bit strong, start with a solution that’s four parts water and one part chlorine bleach. Apply it with a white cloth and let it work for around 10 minutes. Let the floor dry and see if the stain was completely removed. If not, do it again until it does, but strengthen the solution slightly every time.

Hydrogen peroxide. Some people might not like to work with chlorine bleach, and might want another chemical option. Hydrogen peroxide might be the way to go, since it is not as strong as bleach. Do the same as you would for chlorine bleach, but instead of starting with a 4:1 ratio, do two parts water to two parts hydrogen peroxide.

Apply finish, and finish! Now, the last step would be to apply finish that matches your floor to make it match again. Should there be any visible bumps, use 0000 steel wool to rub it away until it is evened out.

Light Stains

These are your run of the mill, superficial stains, most often ones left by moist glasses.

Pastes. There are many products you can use to remove it in a few minutes that work as a paste. Baking soda paste (1 part water, 1 part baking soda), salt paste (salt with only a few drops of water), even toothpaste. You can rub them gently and apply nail polish once you are done.

Petroleum jelly. Sometimes, these faster tricks might not work. Another alternative that can be easily bought is petroleum jelly. It can be applied and left to work overnight. You’ll just need to wipe it away the next morning!

With the right trick, the right amount of effort, and patience, you can get that water stain out in no time, and forget about cloths, mats, and rugs to cover them up!

We’re delighted to announce that we have been recognised as “eCommerce Company of the Year – Small” at the 2019 Northern eCommerce Awards.

On our success, Managing Director and Co-Founder Cameron Christie said:

“We’re absolutely thrilled to have picked up this award. It recognises the hard work, time, and dedication to the business demonstrated by the whole team.

“As a company, we’ve seen considerable growth over the course of this year, and have undergone some significant changes over the course of this year, including across our marketing efforts, operational procedures and how we deal with customer queries, and so far this has paid off.

“We were shortlisted in the same category last year, but unfortunately just missed out, so it’s great to be able to go one better this time around.”

The company was also shortlisted in three other categories at the Northern eCommerce Awards, which were “Best eCommerce Search/Marketing Campaign”, “DIY, Home, Furniture & Interior Design eCommerce Website of the Year” and “B2C eCommerce Website of the Year”.

The full list of winners on the night can be found here.

This post appeared first on https://www.luxuryflooringandfurnishings.co.uk

We’re delighted to announce that we have been recognised as “eCommerce Company of the Year – Small” at the 2019 Northern eCommerce Awards.

On our success, Managing Director and Co-Founder Cameron Christie said:

“We’re absolutely thrilled to have picked up this award. It recognises the hard work, time, and dedication to the business demonstrated by the whole team.

“As a company, we’ve seen considerable growth over the course of this year, and have undergone some significant changes over the course of this year, including across our marketing efforts, operational procedures and how we deal with customer queries, and so far this has paid off.

“We were shortlisted in the same category last year, but unfortunately just missed out, so it’s great to be able to go one better this time around.”

The company was also shortlisted in three other categories at the Northern eCommerce Awards, which were “Best eCommerce Search/Marketing Campaign”, “DIY, Home, Furniture & Interior Design eCommerce Website of the Year” and “B2C eCommerce Website of the Year”.

The full list of winners on the night can be found here.

The post Luxury Flooring scoop eCommerce Company of the Year – Small at Northern eCommerce Awards appeared first on Blog & Advice Centre – Luxury Flooring & Furnishings.

This post appeared first on https://www.luxuryflooringandfurnishings.co.uk

When choosing the right floors for your home, there are many factors to consider. One of the most important points to think about is, ‘who will be using your floors?’. For instance, if you’re a pet owner it’s essential to find a flooring option that will withstand the general wear and tear by your furry friend.

 Over time the impact of your dog or cat will begin to show on your floors. As such, you will need to find a flooring option that will not only minimize any damage caused by your pet but offer longevity as well. With your furry friend in mind, these are the major points of consideration when selecting your flooring: protection from scratches and stains, resistance to damage, the comfort of your pet and the traction of your pet. It’s also important to note here that floor durability not only encompasses scratch resistance but should consider impact and moisture. All in all, when selecting flooring material, you want to choose something that is not only friendly to your pet but also appealing to your interior design.

 To ease the selection process, we have compiled a list of 5 pet-friendly flooring options.

 

Bamboo

 Bamboo is a popular option for pet-friendly homes. This is because bamboo possesses natural durability that makes it both stain and scratch-resistant. Bamboo’s sturdiness is ensured by its high Janka flooring rating; essentially, the higher the rating means the harder the wood. In this case, the high score guarantees that bamboo is not only a sustainable flooring material but will also survive the constant onslaught of your pet’s claws.

 In addition, bamboo is an antimicrobial material which means that your home will be kept free from mold and other allergens. Aside from being incredibly easy to clean, bamboo is also allergen resistant, ensuring that it will not harbor pet fur or other debris.

 

Laminate

 If your furry friend is overly active, laminate flooring is a great choice. Since laminate floors are known for their incredibly tough top layer, this option is fairly scratch-resistant against your dog or cat’s claws. Like bamboo, laminate is extremely stain-resistant and easy to keep clean. However, it’s essential to note that laminate is prone to making a louder and more hollow noise under-foot, as opposed to a more solid material. This option may, therefore, amplify the sound of your pet’s footsteps.

 

Vinyl

 A popular option among pet lovers is vinyl sheet flooring which is considered a resilient flooring material that sustains long-term endurance. If vinyl is installed correctly, this option will wear well allowing for minimal scratches. Also, vinyl has water-resistant qualities so stains and messes from your pet will be easy to clean. An additional benefit of this option is that it is great for softening the sound of your pet’s nails.

 

 Engineered Hardwood

 Again, when ensuring that your hardwood flooring option is pet-friendly it’s best to go with a material that ranks high on the Janka hardness scale. Specifically, you should choose wood species that have a rating of 1,250 or over. Some great engineered hardwood options include Brazilian cherry or white oak. But, even for the sturdiest wood, it’s still important to protect them in order to prolong their longevity. Getting your floor coated in urethane will help minimize any damage sustained through scratches or stains.

 

 Solid Hardwood

 Solid hardwood floors are an incredibly durable option. Although some will say that this option is suitable for pets, this is not necessarily true. However, if the correct protective measures are put in place, hardwood floors can withstand your pet’s habits and behaviors. When cared for properly, by applying a protective coating and conducting regular sanding, hardwood floors can last anywhere between 80-100 years.

 Ultimately, when it comes to selecting the flooring option that is not only right for you but also your animal friend, it’s essential to consider longevity. As such, selecting an option that is primarily scratch-resistant and stain-resistant will ensure that the quality of your floors remain in tip-top shape, allowing you to enjoy them for longer.

 

 

 

New for 2019, our Herringbone LVT flooring (Luxury Vinyl Tiles) range combines style and character with practicality and function, while remaining at a low price. This new range of flooring replicates the look and feel of real wood Herringbone Flooring, with the added benefits of LVT flooring.

We’ve perfectly replicated the look and feel of wooden herringbone, with all of the benefits of luxury vinyl tiles. Our Herringbone LVT features a range of different tones and colours; choices vary from warm, darker colours, such as Golden Oak, to light grey tones, such as White Rustic Oak.

 

A closer look at the Herringbone LVT flooring range

The Herringbone LVT range is practical, tough and durable; a great choice for any busy home. Below is a list of features that our Herringbone LVT includes.

• 2.5mm tile thickness
• 1.25m² coverage per pack
• 0.55mm wear layer
• 613mm tile length
• 102mm tile width
• 20 year residential warranty
• 10 year commercial warranty
• Water resistant 
• Easy to clean and maintain
• Real wood feel textured surface
• Suitable with underfloor heating

 

 

Colours

With the wide range of colours available, our Herringbone LVT Tiles will fit into your style of home easily. Herringbone flooring is one of the most popular interior trends for 2019, and now you can have it in your home with all of the great benefits of LVT.

Golden Oak

This particular shade of Herringbone LVT brings warmth and character to any room, with authentic looking wood grains and knots. This particular shade highlights the dark coloured patterns and lines, Each with their own unique style, creating a real wood effect.

“All we can say is wow. When our fitter had finished we were thrilled to say the least. It looks fantastic and feels warm to walk on.” – Sharon K.

Grey Oak

Grey Oak Herringbone Vinyl Tiles bring distinctive character and style into modern living spaces, offering numerous advantages that only the highest quality floors can provide. An ashy finish covers the flooring, with dark and distinctive patterns sprawling through each section of tile.

Light Grey Oak

A lighter tone compared to Grey Oak, Light Grey Herringbone LVT flooring is highly detailed, while defining its realistic wood knots and patterns. This makes for a great alternative to real wood flooring.

Natural Oak

The perfect tone between a rustic feel and a neutral tone, Natural Oak Herringbone LVT offers an extremely realistic look and feel, with a textured surface to recreate the feel of real wood.

Vintage Oak

A perfect choice if you are looking for a dark, rustic looking wood, Vintage Oak Herringbone Vinyl Tiles offer a striking and bold appearance, while providing a real wood look and feel.

White Rustic Oak

The lightest option of Herringbone LVT flooring we offer. White Rustic Oak is perfect for light, neutral coloured rooms. Darker wood patterns and knots create a beautiful contrast against the light tone of the rest of the flooring.

 

Read more or order free samples

Golden Oak	Natural Oak	Vintage Oak
Read More	Read More	Read More
Add Free Sample to Cart	Add Free Sample to Cart	Add Free Sample to Cart
Grey Oak	Light Grey Oak	White Rustic Oak
Read More	Read More	Read More
Add Free Sample to Cart	Add Free Sample to Cart	Add Free Sample to Cart

 

Where can Herringbone Luxury Vinyl Tiles be fitted? 

Our Herringbone LVT Tiles can be fitted in most areas of your home as it is resilient, water-resistant and easy to clean. However, it is not suitable for areas of your house where the temperature can exceed 27°C, therefore we recommend you don’t lay Herringbone LVT in conservatories.

 

How does it compare to a herringbone wood floor?

Compared to herringbone wood flooring, there are a range of both advantages and disadvantages. These can be a bigger factor depending on what room in the house you are placing the flooring in, as well as how busy your home can get.

 

Advantages compared to Herringbone Wood Flooring

• LVT Flooring is water resistant, which makes it perfect for areas such as bathrooms and kitchens.
• Luxury Vinyl Tiles are considerably cheaper when compared to real wood, this makes them more accessible due to its budget-friendly price tag.
• As one of the toughest flooring options out there, LVT flooring is a great option for busy family homes where there is a lot of foot traffic.
• Unlike solid wood flooring, LVT is suitable for use with underfloor heating.

 

Disadvantages compared to Herringbone Wood Flooring

• You will not have the completely authentic wood feel, which is available only with real wood flooring.
• You don’t have the option to sand and refinish LVT flooring.

 

 

How to fit Herringbone LVT Tiles

This particular range of LVT flooring is glue down, which means an appropriate adhesive is required to lay this flooring.

Before laying your Herringbone LVT flooring, we advise you to leave them in the room for 72 hours prior to installation. This gives the flooring time to adjust to the room’s temperature and humidity levels. 

Make sure your subfloor is level and dry, this is to ensure your flooring is even, and has a solid surface to be laid on. When laying Herringbone Vinyl Tiles, place each tile at a 90-degree angle, with the tiles pointing towards the middle of the room and work your way from the centre outwards. 

Be sure that you are applying the adhesive to the subfloor and no the tile itself. Also, be sure to Score and snap tiles in order to cut them to size.

You also have the option to enhance the look of your flooring using feature strips, which creates a border around your room or between individual planks. 

While click LVT flooring fits together using a click-lock system, glue down vinyl tiles need to be adhered directly to the subfloor.

Click is ordinarily fitted as a floating floor, and can be used with underlay.

Our Herringbone vinyl tiles are glue down due to their distinct pattern, giving you more control over the design of your flooring.

 

Why choose herringbone vinyl tiles?

LVT flooring, in general, is very durable and much more budget-friendly. Our Herringbone LVT flooring has numerous beneficial factors, which make them many people’s preference over real wood.

 

The average price of LVT is cost-effective and a fantastic alternative to real wood. Luxury vinyl tiles are especially effective if you are looking to lay flooring in your kitchen or bathroom, as LVT has the additional benefit of being water-resistant.

 

Conclusion

Our new range of Herringbone LVT offers strength and water resistance. As well as this, the wide variety of colours can fit in nicely with any room in your home. This is a fantastic option if your looking for the appearance of wooden flooring, but wanting more functionality and benefits. 

To find out more about our new range, be sure to head over to our product page where we go more in-depth on every option that we provide. Click here to view the range and order your free samples.

Additionally, if you’re looking for a beautiful herringbone flooring, but in laminate instead of LVT, our range of Herringbone Laminate Flooring has you covered.

If you have any questions or queries, don’t hesitate to give us a call on 03308 088 777.

The post Herringbone LVT – New 2019 Range appeared first on Direct Wood Flooring Blog.